THREE-POINT FRAMES
Three-Point Hyperextension TLSO Back Brace
Three-point trunk support
Explore TLSO back braces for structured support through the mid and lower trunk. Compare a rigid shell with dual air pads, an adjustable high-back shell and a three-point hyperextension frame. Review their different contact points and fitting needs, then confirm the exact configuration for any fracture or postoperative care plan.
Find your support ↓3 styles · compare fit & coverage
THREE-POINT FRAMES
Three-point trunk support
SHELL TLSO BRACES
Adjustable support height
SHELL TLSO BRACES
Firm coverage from the mid back to the waist
Compare the featured designs, or explore every style.
Compare featured structures & sizes ↓See how the actual designs differ in coverage, adjustment and measurement before choosing.
A TLSO is a thoracolumbosacral orthosis, extending support through the mid and lower trunk. This collection offers a rigid shell with air pads, an adjustable high-back design and an open-frame three-point brace. These are different support arrangements, not interchangeable versions of one belt.
When bracing is part of a fracture or postoperative plan, the affected area, movement restrictions and individual fit determine the choice. An LSO focuses lower on the spine; an everyday posture corrector provides a different kind of shoulder and back support.
On a small screen, swipe the table to compare all columns.
| Model | Published construction | Fit decision |
|---|---|---|
| Dual Air-Pad TLSO | Vented polypropylene shell; shoulder straps; three levels of side straps; upper and lower air pads. | Standard configuration. Confirm chest, waist and torso length together, plus pad contact and access to straps. |
| High-Back Adjustable TLSO | Segmented plastic shell, ventilation openings, height and angle adjustments; gray finish. No air pads or inflation pump. | One adjustable configuration. Check the permitted adjustment range and where the upper and lower sections contact your body. |
| Three-Point Hyperextension TLSO | Open frame; chest, pelvic and rear pads; side fastening; white; S, M and L. | Confirm torso length, circumference and pad placement. This arrangement is intended to limit forward bending when correctly fitted for its intended use. |
Compare actual construction, measurements and everyday fit—not only the size letter or the name.
The rigid shell surrounds more of the torso. Its upper and lower air pads change contact at separate back areas; they do not establish traction or a measured decompression effect.
The high-back model has adjustment points that help position its sections. The available range must match your torso and the intended fitting; more adjustment does not guarantee universal sizing.
The open frame leaves more of the abdomen uncovered, but relies on specific chest, pelvic and rear contact points. It is not a general substitute for every rigid TLSO.
Compare whether a carer can reach the side closures, how the brace sits in a chair and how clothing layers affect contact. These details matter during dressing, transfers and permitted walks.
Similar-looking supports can have different jobs. Explore the construction that matches the area and purpose you need.


Compare the support during the movements and situations that matter to you.
The rigid shell surrounds more of the torso. Its upper and lower air pads change contact at separate back areas; they do not establish traction or a measured decompression effect.
Check the fit →The high-back model has adjustment points that help position its sections. The available range must match your torso and the intended fitting; more adjustment does not guarantee universal sizing.
Check the fit →The open frame leaves more of the abdomen uncovered, but relies on specific chest, pelvic and rear contact points. It is not a general substitute for every rigid TLSO.
Check the fit →Keep the cause of symptoms and any prescribed care plan in view while comparing a support.
After some spinal fractures or operations, a brace may be used to control movement and protect the affected area. A three-point hyperextension arrangement may be considered when restricting forward bending is part of the plan. A shell or high-back model has a different contact pattern. The fracture location and stability, procedure and prescribed movement control must guide the decision. AO Surgery Reference notes that some stable fractures may be managed with or without a brace; the diagnosis alone does not select a model.
Osteoporosis increases fracture risk, but a brace does not treat osteoporosis itself. Do not choose a brace solely because pain is in the middle back or because a product is labelled rigid. Share the exact product page and dimensions with your treating team.
Kyphosis and rounded posture: a flexible slouch and a structural spinal curve need different assessment. NHS guidance makes treatment dependent on the cause and severity, with bracing for selected growing children under specialist supervision. Do not assume a retail TLSO will straighten an adult curve or replace a prescribed kyphosis orthosis.
Scoliosis is another distinct indication. NHS guidance notes that braces are used infrequently in adults, sometimes for pain support, while curve-control bracing needs individual assessment and fitting. None of these retail models should be assumed to replace a custom scoliosis brace. Read our scoliosis guide for the distinction.
Use the measuring position and chart for your chosen model.
Send the product link and measurements to support@zszbace.com for product information. Clinical approval of the model and configuration belongs with the treating team.
A smooth close-fitting layer can reduce friction beneath a prescribed brace when compatible with its instructions. Check the skin at shell edges and pad contact points, particularly after fitting or a change in swelling. Persistent redness, blistering or painful pressure needs fitting review.
Follow the exact model’s fastening sequence, air-pad instructions and cleaning label. Extra air pressure or strap tension is not a substitute for correct positioning. Keep removable components in the prescribed configuration and allow cleaned parts to dry fully. Do not cut, heat-shape or reposition structural components to correct a fit problem yourself.
Putting on a spinal brace may require assistance and a specific lying or sitting position. Use the method taught for your brace and recovery plan rather than a generic online demonstration.
Coverage, sizing, comfortable use and care—the details that help you narrow your choice.
Ask our sizing team →No. These models use structured trunk contact. A flexible posture support and a spinal orthosis have different purposes, fitting requirements and movement control.
No. The fracture pattern, stability and required control matter. Ask the treating team to approve the exact model and fitting.
They provide adjustable padded contact. The presence of air pads alone does not establish spinal traction, disc correction or a particular clinical outcome.
Follow the prescribed wear and removal instructions. The answer depends on the condition and recovery stage; do not use a general schedule.
Those labels describe configurations, not universal fit. Confirm torso length, circumference and the model’s limits before ordering.
Ask for a fitting review rather than forcing tighter straps or removing required pads. For purchase help contact support@zszbace.com. Request a refund within 45 days of delivery. See the policy for conditions.